NEWS
News Center
Low-pressure circulation tank for fluorine
2014-09-23 10:16
The low-pressure accumulator, formally known as the low-pressure liquid receiver, is primarily used in forced‑liquid supply systems. It circulates low‑pressure refrigerant via a pump while simultaneously performing gas–liquid separation. Its main components include the cylindrical shell, end caps, a suction‑gas connection (to the evaporator’s suction port), a discharge‑gas connection (to the compressor’s suction port), a liquid outlet (connected to the refrigeration pump inlet), an oil drain port, a liquid‑supply port (connected to the high‑pressure liquid line), a bypass connection, a safety‑valve connection, liquid‑level control ports (one at the top and one at the bottom), and a gas‑bypass connection (to the refrigeration pump’s gas discharge port). Low‑pressure accumulators of varying capacities are selected according to the cooling load, with volumes ranging from 1 to 10 cubic meters. Historically, these accumulators were predominantly employed in ammonia refrigeration systems; however, with the increasing adoption of fluorinated refrigerants as substitutes for ammonia, they are now being increasingly integrated into fluorinated systems. During operation, first open the liquid‑supply valve; once the liquid level inside the accumulator reaches the preset height, open its liquid‑outlet valve and start the refrigerant pump to deliver liquid to the system. The liquid level in the accumulator should be maintained within 30% of the vessel’s capacity; if it exceeds this limit, excess liquid must be drained to prevent wet compression.

Low-pressure circulation tank

Barrel pump unit
Related News
Leave a message or feedback
Contact phone number
Contact Address
Hantang Road, Industrial Concentration Zone, Dongping Town, Lishui District, Nanjing City
Copyright ©Nanjing Lengde Energy-Saving Technology Co., Ltd.
SEO Tag NavigationTechnical Support:China Enterprise DynamicsNanjing